AIR LOCK RELEASE SOLENOID FOR CHALLENGER INGROUND CS10/CS12/CS15

FITS CHALLENGER INGROUND LIFTS CS10/CS12/CS15

  • AIR LOCK RELEASE SOLENOID USED ON CHALLENGER INGROUND CS10/CS12/CS15
  • MANUFACTURER RECOMMENDATION:

The shop air supply must be clean, dry, lubricated, and regulated to 90-120

psi. The air supply must run through a Filter/Regulator/Lubricator (FLR) within

30 feet of factory assembled air valve. Failure to provide clean, dry lubricated

and pressure regulated air will void warranty on pneumatic components.

Push ?? airline through the PVC chase beginning at the power unit. Connect the

airline to the appropriate push lock fittings at each end. Refer to figure 8.

NOTE: DO NOT bypass factory supplied in-line filter.

$ 201.48 CAD

Only 2 left in stock (can be backordered)

Changing the seals on an automotive lift hydraulic cylinder

Changing the seals on an automotive lift hydraulic cylinder.

In this instructional blog, we will guide you through the process of changing seals in a high-pressure hydraulic cylinder used on automotive lifts.

Key Considerations When Buying a Used Car Lift

When it comes to working on vehicles, having a reliable car lift can significantly enhance your efficiency and productivity. If …

Inspecting your automotive lift yearly is not only for compliance, it’s good business.

Automotive lifts are an essential piece of equipment for any auto repair shop. These lifts are used to lift and …

These 10 Commonly Replaced Parts on a Tire Changer Can Save You Money.

The tire changer is among the most important pieces of equipment in your shop and it’s up to you as …

AIR LOCK RELEASE SOLENOID FOR CHALLENGER INGROUND CS10/CS12/CS15

FITS CHALLENGER INGROUND LIFTS CS10/CS12/CS15

SKU: SEG-700-8023

$ 201.48 CAD

Only 2 left in stock (can be backordered)

  • AIR LOCK RELEASE SOLENOID USED ON CHALLENGER INGROUND CS10/CS12/CS15
  • MANUFACTURER RECOMMENDATION:

The shop air supply must be clean, dry, lubricated, and regulated to 90-120

psi. The air supply must run through a Filter/Regulator/Lubricator (FLR) within

30 feet of factory assembled air valve. Failure to provide clean, dry lubricated

and pressure regulated air will void warranty on pneumatic components.

Push ?? airline through the PVC chase beginning at the power unit. Connect the

airline to the appropriate push lock fittings at each end. Refer to figure 8.

NOTE: DO NOT bypass factory supplied in-line filter.

Part Manuals related to this item
Products related to this item
Changing the seals on an automotive lift hydraulic cylinder

Changing the seals on an automotive lift hydraulic cylinder.

In this instructional blog, we will guide you through the process of changing seals in a high-pressure hydraulic cylinder used on automotive lifts.

Key Considerations When Buying a Used Car Lift

When it comes to working on vehicles, having a reliable car lift can significantly enhance your efficiency and productivity. If …

Inspecting your automotive lift yearly is not only for compliance, it’s good business.

Automotive lifts are an essential piece of equipment for any auto repair shop. These lifts are used to lift and …

These 10 Commonly Replaced Parts on a Tire Changer Can Save You Money.

The tire changer is among the most important pieces of equipment in your shop and it’s up to you as …